🔥LIMITED TIME 50% OFF! 🏕️360° Magnetic LED Work Light ⚡ Serious Lighting Power for Garage & Outdoors!
🔥LIMITED TIME 50% OFF! 🏕️360° Magnetic LED Work Light ⚡ Serious Lighting Power for Garage & Outdoors!
BUNDLE & SAVE
Couldn't load pickup availability
🔥LIMITED TIME 50% OFF! 🏕️360° Magnetic LED Work Light ⚡ Serious Lighting Power for Garage & Outdoors!
⚡ Put Serious Light Exactly Where The Darkness Is
A removable magnetic LED pod that mounts without drilling, swivels across multiple angles and lets you control the light remotely — for low-speed off-road trails, campsites, field work and emergency repairs.
Stop Drilling Permanent Holes For Temporary Lighting
Conventional auxiliary lights usually require fixed brackets, drilling and permanent placement. This pod is designed to attach to a clean, compatible metal surface when darkness arrives and lift away again when the job is finished.
Fixed Auxiliary Light
- ✕ Permanent bracket and mounting position
- ✕ Drilling may be required
- ✕ Harder to move between work areas
- ✕ Beam direction can be limited after installation
Magnetic LED Pod
- ✓ Attach to a compatible metal surface
- ✓ No permanent mounting holes
- ✓ Reposition it as the task changes
- ✓ Remove and store it after use
Aim Forward. Sweep Sideways. Point Down.
The dual-axis mounting structure lets you rotate and tilt the pod so the beam follows the work instead of forcing the work to happen in one fixed direction.
Aim the pod ahead to expose dark terrain, obstacles and trail edges beyond the vehicle's standard light pattern.
Rotate the beam toward the shoulder, campsite or work zone instead of leaving the light locked straight ahead.
Point the pod toward a tire, wheel well, recovery point or underbody area during field repairs.
Wireless Remote Operation From The Driver's Seat
Use the included wireless remote to switch the lighting environment without reaching across the hood or walking back outside every time you want to turn the pod on or off.
Operate the pod without adding another loose hand switch to the exterior mounting location.
Keep the remote attached to a suitable interior location so it is easier to find when conditions change.
Turn the light on before stepping into a dark recovery, repair or campsite work area.
Reduce the need for a separate manually mounted exterior switch at the pod itself.
From Blind Trails To Muddy Repairs
The pod is most useful when the light must follow the task: ahead of the vehicle, beside the campsite, below the chassis or around a utility work area.
Push Useful Light Beyond The Standard Beam Pattern
Mount the pod on a suitable metal panel, angle it toward blind trail edges and illuminate the direction your fixed lights do not cover well.
Redirect the beam toward bends, shoulders and uneven ground that standard forward lights may miss.
Re-aim the pod when the trail direction or work area changes.
Intended for low-speed off-road, private-property and stationary task-lighting situations.
Light The Campsite Without Holding A Flashlight
Aim the pod toward the cooking table, tent entrance, equipment area or surrounding ground while keeping both hands available for setup and work.
Direct Light Toward The Tire, Recovery Point Or Chassis
A fixed forward light may brighten the road while leaving the actual repair area in shadow. The adjustable pod can be aimed downward toward the part of the vehicle that needs attention.
Illuminate lug areas, tread, wheel wells and nearby ground.
Light tow points, straps, shackles and muddy connection areas.
Improve visibility around accessible underbody and chassis components.
Temporary Task Lighting Wherever The Machine Stops
Move the pod between suitable metal mounting points to light tools, cargo, fencing, equipment or a work zone without installing a fixed lamp at every location.
Clean. Mount. Connect. Aim.
The setup is designed around a removable magnetic base and an external 12V power connection. Proper surface preparation is essential for secure holding and paint protection.
Remove dust, grit and debris before placing the magnetic base.
Route the external harness to a suitable 12V source or compatible auxiliary switch panel.
Aim the dual-axis pod, then use the wireless remote for operation.
Secure Mounting Starts With A Clean Surface
Dirt trapped under a magnetic base can reduce holding strength and may mark paint.
Confirm the chosen panel is magnetic, stable, clean and suitable for the base.
Remove the exterior-mounted pod before high-speed public-road travel.
Key Details At A Glance
| Product Type | Removable omni-directional magnetic LED pod light |
| Light Source | 4-LED front matrix |
| Mounting | Tool-free magnetic base for compatible metal surfaces |
| Adjustment | Dual-axis swivel and tilt for multi-directional aiming |
| Control | Wireless remote operation |
| Power | External 12V vehicle power harness |
| Recommended Uses | Low-speed off-road trails, campsites, field recovery, farm and utility work |
| Weather Use | Listing describes resistance to rain, dust and splashes; avoid immersion |
| Before Use | Clean the mounting surface, confirm magnetic compatibility and secure cable routing |
Frequently Asked Questions
Will the magnetic base scratch the vehicle?
The listing describes protective padding beneath the base. However, the mounting surface and base must both be clean. Grit or metal debris trapped between them can cause marks, so wipe and inspect the area before every installation.
Can I drive on the highway with the pod mounted outside?
It is not recommended. The product is intended for controlled low-speed off-road use, campsites, private property and stationary task lighting. Remove it before high-speed public-road travel.
Does the light run on an internal battery?
No. The current listing describes an external 12V vehicle power harness for continuous power.
Can the beam be aimed in different directions?
Yes. The dual-axis swivel structure is designed to rotate and tilt the light for forward, side-area and downward task illumination.
Is the remote wireless?
Yes. The current product page includes a wireless remote for operating the light from the vehicle interior or nearby work area.
Is it safe to use in rain or mud?
The listing describes the housing as suitable for rain, dust and splash exposure in rugged environments. Do not submerge the unit, and protect electrical connections according to the supplied instructions.
Will it attach to aluminum, fiberglass or plastic body panels?
A magnetic base requires a compatible ferromagnetic metal surface. Many aluminum, fiberglass and plastic panels will not hold a magnet. Test the mounting location before use.
Can it replace my normal headlights?
No. It is auxiliary task and off-road lighting. It should not replace required road-legal headlights or other mandatory vehicle lighting.
⚡ Mount It. Aim It. Light The Work. Remove It.
One portable pod for the trail ahead, the campsite beside you, the tire below you and the work area wherever the vehicle stops.
FAQ
FAQ
1. When will my order ship?
Most orders are processed within 1–3 business days.
2. How long is delivery?
Standard U.S. delivery usually takes 5–12 business days. International orders may take longer.
3. How do I track my order?
Once your order ships, you will receive an email with a tracking number.
4. Can I change or cancel my order?
Orders can only be changed or canceled before they are shipped. Contact us as soon as possible if you need assistance.
5. What payment methods do you accept?
We accept major credit/debit cards, PayPal, Shop Pay, Apple Pay, and other secure checkout options (depending on availability).
6. What if the item arrived damaged?
Please email us with a photo of the damaged item within 48 hours, and we will arrange a replacement or refund.
7. What if the package is lost?
If your package is marked “delivered” but you didn’t receive it, contact us and we will help investigate with the carrier.
8. Do you ship internationally?
Yes, we ship to most countries. Shipping times vary based on destination.
Trustpilot reviews
Excellent 4.8 / 5
19,899 Reviews